I want to become a JEDI. For that I have to create my own lightsaber - so I did. Here, you can do it also!
This lightsaber is unique - it has dynamo charging or usb charging! Flashlight inside is from Decathlon - Dynamo 500. Also I bought better optical lens CA11663_HEIDI-RS LEDIL. You can use the one from flashlight, but you will spare some time with changes.
Without blade - it can be use as proper hand torch :) multifunctional!
Blade is from polycarbon pipe D25mm x d19mm. And it is glued with machined parts like thread and nut - you can print that from other project - depend on what diameter of blade you can get. Nut is in holder joined by two M3 screws. On the top of the blade is small mirror for better distribution of light inside the pipe. Pipe is slightly sand by sand-paper.
Whole cover is screwed by four M3 with nuts.
For disassembly Dynamo 500 are here photos of it. You do not want to destroy it before you create it :D So carefully cut the cover after taking off both ends of the torch. Than pull out the lever and take out the plastic safety washer.
In model are also holes in place, where the lens are. They represent lightsaber crystal.
For changing colors I use color film mostly from bottles and I put them between lens and blade.
Enjoy your Dynamo Lightsaber!
Category: Construction Toys
The author marked this model as their own original creation. Imported from Thingiverse.