Clover Pop Up Basket

Pop up clover shaped basket. Print in place, can be used as trivet when flat or as a basket when popped up.

Note: This is a very precise print and will only successfully print on well calibrated printers and close following of directions.

Print instructions

Category: Containers Summary

Pop up clover shaped basket. Print in place, can be used as trivet when flat or as a basket when popped up.

Note: This is a very precise print and will only successfully print on well calibrated printers and close following of directions.

Print Settings

Printer:

RailcoreZL 300

Rafts:

Doesn't Matter

No

Resolution:

.25 mm (required)

Polyalchemy PLA ](http://www.amazon.com/s?url=search-alias&field-keywords=Polyalchemy+PLA&tag=tv-auto-20) Green

Notes:

Important, must slice at exactly 0.25mm. There is a gap in the model that has to be exactly that height or either the rings will either fuse with the base or will droop too much. Also preview the gcode before printing to make sure you have that gap layer, reference the screen shot.

Post-Printing

After printing the model will be lightly fused together. I took my print removal spatula and starting at the handle worked the ring and spiral from the base. Go slowly and don't use too much force or you may snap base completely off.