Shower Shelf (taller walls + smaller area)

This shower shelf is a remix of Shower Shelf by TAOG. I found his shelf to be really useful and stylish, but wanted to store my Waterpik cordless flosser, which is a little top heavy and likely to be accidentally knocked off the edge of the original model. I wanted a smaller shelf with higher walls to place above the main shelf that TAOG designed, so my flosser could live in the shower without fear of falling to it's destruction.

I noticed that the original files weren't available for TAOG's design so made it from scratch with Fusion 360 and have included my files below. Another difference between our models is that the angles on my shelf are a little sharper, but otherwise they look like siblings :)

I printed my shelf with 0.2mm height, and 15% infill, but with 4 perimeters so the base would be sturdy. The shelf would be fine if printed with 0.3mm layer height. The shelf won't need supports but I did utilise supports for the glue pads, which were printed upright. I printed my glue pads with 0.3mm layer height and 2 perimeters.

With the source files below, feel free to remix to your heart's content :)

Side Note: I used clear silicone from Bunnings to mount TAOG's shelf, as well as my own. Nothing fancy :)

EDIT: I have added the files for the flosser holder (red PETG in the photos)