BugBu 260

The BugBu 260 has a printable area of 235x235x300 unless you slap on a Bambu build plate, then you get 260x250x300 build volume.  This uses a cantilever bed to eliminate the closed loop belt system.  All part are printed at 6 walls and 20% infill minimum, designed for 0.4 nozzle at 0.2 layer height.  These files are made for PLA, if using ABS or ASA bump size of parts up to 100.5% to account for shrinkage of materials.  With lots of testing hours, it is working well currently on the cantilever, but there will be mods coming for it to give a couple of bed operation options.