Adaptor Disk for Prusament Spools for Bambu Re-Spooler by Miklos Kiszely

Inspired by the spool locking mechanism of the spool rewinder by jcjames_13009 I remixed the flat 50mm Spool holder of the wonderful Bambu Lab P1 / X1 / X1C / X1CC Filament Spool Switcher & Winder   by Miklos Kiszely.  I use the Bambu Re-winder for my Prusa I3 MK3S+ to respool other than Prusa filaments onto Prusament spools. In my opinion Prusament Spools are a better fit for the Autorewind Spoolholder by Vincent Groenhuis Than most other spools with bigger center holes. 

The standard flat 50mm adaptor discs do the job, but I wanted an adaptor that stays in place even when you remove the geared axis. That is why I used the hexagonal spool frame pattern for attaching the disc to the spool. 

I recommend using two of the hexagonal adaptor discs for one Prusament spool. 
 

Please show me your results and send me fotos of your makes. I like to see how you use this model. If you have ideas for improvement don’t hesitate to send them to me in the comments.   I will try to incorporate your suggestions and will modify the model for special needs if you ask me to do so. 
And of course a like ♥ or a rating ⭐ of the design are always welcome. 

happy printing, clamikra