ASUS RTX TUF GPU Shroud

Select between different styles, 3 stripes as a throwback to the old school ASUS GPUs or plain with 2 different sizes, regular or XL with raised walls and trapezoid cutouts.

Having a printer that's bigger than 300mm is recommended to print the full shroud in one piece.

First step is to remove the TUF sticker on the RGB piece, it can be pried off with a razor blade/xacto then unscrew the 3 screws on the piece to separate it from the shroud, using the sticker on the printed shroud is optional I left mine off.

Second step is to screw the RGB piece in place.

Third step is to remove the 6 screws around the shroud and replace with the printed one and screw it back in to place.

If you print the halves I included small tabs to glue in the inside of the shroud to try and keep them together.

please note I moved the screw holes by 2mm so it will be spaced different to the pictures