Fuse-Box

This box carries five fuse holders. Diameter 12mm.

I designed it for my Arduino and esp projects. I often use relays shields to control loads up to 230V~

The most relays are not able to switch 16A - like e regular fuse in my installation allows. So its necessary to include a fuse that protects the shield from overloads in case of failure.

This box must be installed in additional housings and is only suitable for dry environments.

Additionally needed 6 screws M3x10.

The box can be mounted on a plate (or where ever) from below with M3 screws.

Notice: Electrical installations in the mains voltage area may only be carried out by electricians!