Tesla 'Lift Pucks' Case

If you've got a Tesla Model 3 / Y you might have lift / jack pads / pucks so you can lift your car safely either at home or at a commercial garage. They usually come in a case, but mine got a bit damaged so I quickly designed this replacement case.

The lid is snap fit so you can push it on / pull it off. This is a pretty quick and dirty design so it's not perfect and I think it could do with being very slightly taller. But I didn't want to waste material or have the pucks loose. They shouldn't rattle around in this case.

Print at almost any settings you like. I printed with 0.3mm draft on an i3 MK3S with PETG. I would recommend a higher temperature filament such as PETG if you're going to store in your car since the interior can get warm. Consider a colour change on the lid so that the text can stand out.

Important: The lid needs to be printed face down, but the STL has it face up. Flip the lid over in your slicer.