Snap close box.

This remixed snap fit box is based from the online tutorial by Sean Kennedy (see YouTube link below). I thought his design was interesting so I gave it a go. His original model is used to encase a raspberry Pi. My version excludes the hardware holes and plays around with the dimensions. If you are new to the CAD world, I would absolutely recommend watching Sean's follow along tutorials. He takes you step by step, and shows you how to build the model from scratch.

Printing instructions:

Print each half of the box with the flat side facing down. I recommend using a brim to aid in bed adhesion and to decrease the possibility of warping. The joinery is tight right off the printer, so put the box together and take it apart a few times. The model in the pics is made from Polymaker PLA.

Feel free to print it and enjoy! :)