MAK PrusaSlicer Preset for Sovol SV06 / SV06 Plus

Making most of Sovol SV06 Plus in PrusaSlicer (based on Prusa MK4 printer). Profile for SV06 non-Plus also included.
152
2285
4
6562
updated May 20, 2023

Makes

Comments

Thank you! Switching from Sovol's customized Cura to PrusaSlicer and installing your profile has made an amazing difference in the quality of PETG prints on my SV06+.

It seems to be working for my SV06 (not Plus), but I'm wondering if there's a way to get the build plate to look like a Sovol build plate? It probably doesn't matter, but I've tried a couple of other profiles where it did (and yes, I'm a 3DP newb!).

@SherryT_1962063 Sure it is possible. You can add pictures of Mickey Mouse if this is what you like ;).

Prints just a little Faster than the included profiles in prusa installation wizzard.

I have the dual 5015 mod for my sv06+ , what profile/settings do I use to do very fast printing with this printer? Any fast profiles out there to take into account this extra cooling?

Wow, this is fantastic! Very helpful for the less tech-savvy among us. Thank you.
Will these profiles work with Orca Slicer?

mak77, Thank you for these perfect profiles! I was wondering if it is compatible for Klipper also now? Because i've just started upgrading my systems to Klipper now :-) If not, any chance to sort out the profiles for these from scratch from you since i don't like those other profiles that i've tried now.

Hey there :)
Would it be possible, to get a working config file for the current Prusa Slicer? :)

Thank you! made my transition from Cura to PrusaSlicer easy! and gotta say the prints (with the SV06 Plus MK4 profile) already make up the quality and speed much better than my half configured settings in Cura 5.4.0.

I Use this profile, It prints very well! Thanks

These have been great for the most part! Depending on what I'm printing, Cura sometimes pulls through with a better finish but PrusaSlicer seems to do a lot of things better overall.

Any updated configs coming with the 2.6 release? :)

Cheers MAK!

@SwiftCookie_974532 No need for an update. If there are updated Prusa MK4/MK3 profiles, they will update themselves.

This is golden. This printer realllly likes prusaslicer vs Cura. Thank you for the settings