221-415 WAGO Mount with Labels (REMIX)

These are some WAGO 221-415 holders, which are just a remix of the WAGO holders in the Voron Github (here).  

Since these models are designed to work with electrical components (WAGO blocks), use these models at your own risk.  

The stock 2020 rail WAGO mounts included in the official Voron files fit the WAGO 221-415 blocks perfectly.  So well that I had to break the first one I printed to remove the precious WAGO's when I remixed the design, and needed them out, to test it.  The models here are just modified from the original Voron design and I did not change the parts of the models which hold the WAGO blocks (since that works well).  

There are really only 3 changes from the original design incorporated into this remix.  The first change was to create a 4x415 block (as well as a 2x415 block).  Then I added some taller walls between the WAGO's, and label holders.  The walls are there to give connections a bit of extra protection from getting bumped.  The walls also make the holder taller than the original Voron models (which are 12.2mm tall), however I am adding some models which are the same 12.2mm height (look for “SHORT” in the name for these).  The shorter models are not tested so please provide feedback if you print them. The last change is the label holders, which are designed to be used with Brother P-Touch 12mm labels, but other labels would also work if they can be made to fit.  Since the labels may not stick well to a bumpy printed surface, they are retained by small frames which will slide over them.  A dab of superglue could be used to hold the frames if there are no plans to change the labels.

There are three sizes and the label frames are the same between them (just print as many frames as needed).  There are also some blank labels, which can be used instead of the frames, if you want to add printed text within the slicer.  The design shown in the pics is the one I used in my Voron 2.4 R2 build, and is slightly different that the models here.  But I only updated the design slightly, so that all the WAGO's have individual frames and higher walls between them in the models posted here (compared to the model I used which has two WAGO's sharing one label frame).  

The STEP file is included for easy remixing.

If you find these models useful, please post a like or a comment with some pics of your prints. 

You can find the other things I'm working on at my blog here.  You can also follow me here on Printables to see what new stuff I post. 

 Thanks for looking!

Changelog:

8/29/2023 with additional (shorter) models which are the same 12.2mm height as the original Voron files.  

VORON_SHORT_2x415WAGO_Label-9A.stl

VORON_SHORT_3x415WAGO_Label-9A.stl

VORON_SHORT_4x415WAGO_Label-9A.stl

4/13/2025:  Added some blank frames which will allow for printed text labels, using the slicer and text modifiers.  Thanks to Steiner-SE for the suggestion! 

Updated description