Simple Hexagon Tissue Box Cover

This is a tissue box cover I designed with a simple hexagon pattern. I have two versions available, one with an embossed design (where the hexagons stick out), and one with a debossed design (where the are cut in).

The size is a good fit on the small cube Kleenex boxes (about 112mm X 112mm X 130mm), but if you are using a different brand you should be able to adjust the scale in your slicer.

Best printed at 0.2mm layer height with 0% (yes 0%) infill. You will need at least 3mm of solid top/bottom layers, so I would recommend setting 8 top layers and 8 bottom layers.