Spilled Coffee with Mug (No glue required)

As stated in the title, this model does not need glue to hold together, there is a slot in the bottom of the mug for the spill print to clip into. Also, if you look at the mug you will notice that it is not completely round on the outside. The flattened edge is just to keep it lying in one place and allow it to sit flatter on a surface. The handle also has a small flattened edge for the same reason. In my print the mug is black/white dual color filament and the coffee is light brown filament. The whole print took about 4 hours on a Bambu Labs P1P.