Fan remote holder [12x46.5]

Remote holder for fan anything with similar ish dimensions can fit inside. 12x46.5x58

Specifically made for Karl Hagemann fan. But any remote thats within 12x46.5x58 can fit inside.

2 models available. One with text and one without.

Meant to be used with double sided tape, or hotglue to any surface you'd like to mount this on.

No support required.

Print at a slower speed for letter defenition (40-50mm/s).

No brim needed if your bed surface isn't garbage.

Can be made from any material, however i dont reccomend materials with addatives such as carbon fibers or anyhting rough since these may scuff up the remote.