Wooden box Ikea mount for bicycle

I made an attachment for an ikea wooden box to attach it to my bike easily.

I use the wooden box ikea KNAGGLIG (702.923.59).

I fix all printed part to the wooden box with wooden screws.

I also protected the case with linseed oil and reinforced it with some wooden srews.

You can print all without support.

You can find foot for this wooden box Ikea mount for bicycle here : http://www.thingiverse.com/thing:2015418

You can find holder for Vanguard tripod for this wooden box Ikea mount for bicycle here : http://www.thingiverse.com/thing:2015443

You can find holder for bicycle rear lights for this wooden box Ikea mount for bicycle here : http://www.thingiverse.com/thing:2015426

And ... that work so enjoy :D

UPDATE :

I add a top

I use a marine plywood board 5mm - 460mmX310mm

For the hinge I made that : https://www.thingiverse.com/thing:2472694

For close it I made that : https://www.thingiverse.com/thing:2472706

A strap for my wooden box here : https://www.thingiverse.com/thing:2472716

I also screw a quick release vanguard on it : https://www.thingiverse.com/thing:2472789

I also add some foam plate (foam flycase).

Print Settings

Printer:

Prussa I3 Geetech proB

Rafts:

No

Supports:

No

Resolution:

0.3 mm Nozzle - 0.15 mm Layer height

Infill:

20%