Embedded Skull Dice for transparent print

https://www.youtube.com/watch?v=KesvLciE8rw This is a simple dice with a skull-shaped void inside it.
93
484
11
2251
updated December 1, 2020

Description

PDF

This is a simple dice with a skull-shaped void inside it. In order to see the skull you need to use a transparent print process. Theoretically SLA should work (but lacking an SLA printer I haven't tried). For FFF Colorfabb HT will work, if you can print it hot enough and have an enclouser and can turn off the fan and turn your settings down to print fairly slow. See the video for ideal print settings.

Print instructions

This must be printed without supports as supports inside will ruin the void.

There's still some question about orientation. The skull can't print facing up, the eye holes need support, so should I print it on the bottom or the side? The bottom tends to be very clear, but if you haven't had a perfect purge that's a no-go. But on the side any bubbles in the print become very visible. There's no clear answer to this one, pun intended, but I think if you printed these I'd say skull down, and that's how I uploaded it.

Model origin

The author hasn't provided the model origin yet.

License


Highlighted models from creator

View more