VORON AB Belt Installation Helper (Clamp)

This is a simple, easy to print and easy to use, 3 piece clamping mechanism to facilitate installation of the belts and carriage on the Voron 2.4 and Trident.   You need two sets of these, one for each side of the carriage.  I personally found that installing the belts and the carriage on the 2.4 was not very easy with just one person, so I designed these.  You will need to install 4 heat set inserts into the U shaped piece and then use 4 M3x18 (or 20) screws to hold the three pieces together.

Use standard Voron print settings.  Just make sure you print the U shaped piece vertically, so the four holes can be printed accurately.

[Update 5-13-2023]

Added a two screw version of the three parts.  The original design used 4, which was unnecessary, however I left those models if anyone is still interested.  I did not update or include images of the two screw version.  I simply removed the four existing corner holes and replaced with two center holes.

[UPDATE 5-18-2023] 

Per request, I have added the CAD step file for those that want to modify the design