The handle consists of 5 parts:
- 1x Top hinge (30mm height)
- 1x Bottom hinge (30mm height + 20mm pins)
- 1x Handle (250mm height)
- 2x Hinge cover (30mm height)
The model uses pentagon shaped pins, to attach top and bottom hinge to the handle. It's a tight fit, and calibrations are in order.
Print instructions
- Printed on a Bambu Lab X1C, in white PLA
- Textured PEI plate
- Standard PLA basic profile, 3 walls, 25% gyroid
- Used standard brim on handle
Tags
The author marked this model as their own original creation.