DIY Filament Rack
A cheap and easy solution to lift my ever growing leftover filament collection off the floor.
46
223
2
1618
updated May 12, 2023
Description
PDFTakes in a 25mm outer diameter tube, can be thick pvc or metals like aluminum/steel. Tested with 75cm long aluminum 2mm thick aluminum tube extrusions. Mounts with 2 screws on each support piece, tested my setup up to 10kg's of spools.
Printed on BambuLab X1C - 0.2mm STRENGTH preset with 3 walls + 20% infill using Porima brand Recycled ABS
Tags
Model origin
The author marked this model as their own original creation.