Linear Rail Alignment Tool MGN7, MGN9, MGN12, MGN15

There are 2 versions: 

• The regular, if you love simple things.
• The clip, more useful in vertical configuration, especially if you need it to stay fixed without holding it with your hands.

Every stl contains both versions in order to limit the file number. Just delete the unwanted one.

The clip version, as the name suggests, can be clipped directly onto the al profile just by pushing it. The best way to remove the CLIP version is to use your thumb and middle finger to grab the flat part of the clip at the back, make it wider using your finger and just pull towards you. 

Available in 3 formats, as you can see in the pictures.

• Standard 2020 profile.
• Front 2040 profile, as in most ender clone dual z rail conversion.
• Lateral 2040 profile, called 4020 in the files, for Voron Switchwire z axis configuration and similar.

Print settings:

• Wall line count: 3 or more
• Infill density: 0%
• top and bottom layers: 0

These settings should guarantee the fastest print time and get you the full mechanical properties. Most of this object has been designed in order to be printed with 3 continuous walls with a 0.4mm line width.

If this has been helpful to you, saved you some time or some money, please consider supporting me with a tip trough Ko-fi.

https://ko-fi.com/addictivemanufacturing