OpenMower Raspberry Pi 4 mount for YF500

This is a mount for Raspberry Pi 4 and Armour case for the open mower project. Fits in a YardForce classic 500 mower. You can also mount the Pololu AltIMU-10v5 but i do not recommend at because auf interference.

• Use M3 for the clip3
• Use M4 screws for mounting to case

I recommend to cut a M4 thread in the existing pins in the mower case. No need for cutting M3 thread in the baseplate for the clips.

• PLA, or better PETG
• Nozzle diameter 0,4
• Layer height 0,2
• Infill 40%