Plant Label, Print it - Bend it - Stick it (German, Deutsch)

More plant species will follow soon :-)

Maximum length of the file is currently 145mm, so it also fits on my Ender 2

There are two ways to print the plant labels.
 

Option 1
Print in one colour and draw on the writing with a waterproof pen.

Option 2
Multi-coloured print, I printed it with the colour change function of the PrusaSlicer.

Material: PLA

Printing a bending template as an aid
The template helps to keep an angle of 90° in one direction and an angle of 20° in the second direction.

Caution: Danger of burns, hot water!!!

Bending the plate

1. Pour hot water (80-100°C) into a bowl. 
2. Hold the shield in the boiling water (the bar softens very quickly).
3. Align the plate on the bending device, there is a small mark/notch in the middle of the plate, this must be in line with the edge of the bending device. (see picture)
4. Bend the rod of the template downwards and hold it until it is firm again.

Done :-)

New: Unlabelled plant labels available for self-writing with labelling device or waterproof pen.

https://www.printables.com/de/model/478594-plant-label-blanc-inscribable-print-it-bend-it-sti

There are also English pre-labelled signs available.

https://www.printables.com/de/model/479445-plant-label-print-it-bend-it-stick-it-english

Current plant species:

Basilikum	Eisbergsalat	Erbse	Erdbeere
Himbeere	Kiwi	Knoblauch	Krauthäuptel
Petersilie	Pflücksalat	Radieschen	Rosmarin
Rucola	Schnittlauch	Stachelbeere	Zitronenthymian

Update 11/05/2023:
Spelling error corrected (Krauthäuptel)

Update 12/05/2023:
add video bending tutorial :)

Update 14/05/2023:

Update 21/05/2023:

Update 02/06/2023: