POCKET TOOL GRINDER

Having built the POCKET WOOD LATHE and the tools from sewing machine needles I needed something to sharpen them on hence this tool was conceived.

So this is the second tool in my pocket series, it is based on my POCKET WOOD LATHE https://www.printables.com/model/477541-pocket-tool-grinder

Centered on using the the same head-stock as in the wood lathe, the rest of the tools will be based around the same style.

The bearing on the head-stock can be fitted to the lathe, as I found the shaft has a tendency to float back and forth, so this fixes that problem.

The mandrel for the grinding wheel is a standard Dremel mandrel that I cut the 3mm end off and drilled it to suit my motor.

Stay tuned for more pocket tools for modelling.

PARTS LIST

HEAD-STOCK x1

SADDLE x 1

TOOL-REST 1

stand x 1

bearing to suit motor shaft OD is 10mm ( my motor had 1/8")

4mm cap screws x 1

3mm cap screws x 10

8mm rod 2 pieces of ABOUT 100MM

motor to suit mine is from an old battery drill

Category: Machine Tools