SCALEPRINT CB-19STONE CHIMNEY 00/H0

Here we have another of the chimneys for 00/HO models, this one is a stone texture and the base section is 10mm x10mm and the top is about 16mm x 16mm, and is about 30 mm tall with a capping. Is printed in 4 parts to get best detail print then glued together after printing. There are 2 different bases one for 45 degree roofs and one for 60 degree roofs plus there are 3 different caps that can be used on the top

I use ABS Acetone mix to glue the parts to the plaster also to glue the plaster together, makes a very versatile glue.

Print Settings

Supports:

Yes

Resolution:

Notes:

I use supports on the 45 degree edges