Drybox IKEA 10.6L MIX

I wanted the silica gel container from one design and the adjustable dual spool holder from the other, so I mixed the two excellent designs linked below.

Modifications

1. Modified the silica gel container to be the spacer for the spool holder on both sides, so I made it shorter.
2. Added small holes to the container to allow more airflow to the silica gel.
3. Cut of the spacer from the spool holder middle part (barbaric way, sorry)
4. Designed the required "rod" for the spool holder, so you doesn't have to buy it (not an easy task, as it has to be a hair less than 8 mm in diameter)

The hygrometer case can be used as a handle to lift the container if left unpopulated :)

Printing

Printed everything except the cap (linked below) in PLA. The containers without supports, but the single (outer) spool holders with support. See the attached 3mf files.

Recommended accessories

• Fitting: https://www.printables.com/model/109402-drybox-filament-guide-using-ptfe-tube
• Cap: https://www.printables.com/model/80801-ptfe-tube-cap-with-filament-holder

Credits and more info

See the links in the Model origin table below.