Garmin Varia 315 Radar bicycle mount

For my Varia Radar 315 I had to design a new base-mount that doesn't block the view to the taillight. 

I discovered from Matthias the wahoo mount which works perfectly with the locking mechanism of the Garmin Varia 315. 

You need:

• 1 x the bike computer mount
  • https://www.printables.com/model/330307-bike-computer-mount-for-wahoo-devices
• 1 x My base mount hozontal or vertical base mount
• To screw everything together I use:
  • 2 x M3*12mm screws (for the Wahoo/Varia adapter from Matthias)
  • 2 x M3 Nuts
  • 2x M5*16mm screws (for the hold on the bicycle) 
  • 2x M5 Nuts

I printed both models with PETG+ with cura 5.2.2 with full support everywhere.

NOTE: There are two versions of my base mount, one for vertical alignment (horizontal holes) and the other for horizontal alignment (vertical holes) of the radar.