Fidget Slider

It clicks! It slides! Hours of fun for the whole family. Requires 9 6X3mm magnets.

Print Settings

Rafts:

No

Supports: 

No

Resolution:

0.2

Infill: 

20%

Notes:

Used Cura to slice. Use the stop at layer g-code modifier to stop at layers 76, 101, and 216 to put the magnets in. You'll also want to have it move the nozzle away so you can get to the part. After it's printed, lightly sand the middle part so the slider slides more smoothly.

Category: Mechanical Toys