Nodes Construction Toy

Nodes is a construction toy that lets you build large wireframes with minimal material. Use those filament scraps for something big!

https://youtu.be/Wj0XRU5XRyo

Printing

• No supports needed
• Requires some precision for a nice part fit
• Use PETG or TPU for the links
• Use scrap PLA for the node connectors

Options

• Four node connector shapes (triangle, square, pentagon, hexagon)
• Six link lengths (4, 6, 8, 10, 20, 30 notch)
• Trimmable Link - Designed to be cut down to a desired length

Tips

• Links need to be able to bend - PETG and TPU is recommended.
• For shorter links (4 & 6 notch), TPU works best.
• If node ports are too tight, use a flat head screwdriver to widen them slightly.

Common Shapes

• Tetrahedron - 4 nodes, 6 links
• Octahedron - 6 nodes, 12 links
• Cube - 8 nodes, 12 links
• Dodecahedron - 20 nodes, 30 links
• Icosahedron - 12 nodes, 30 links

Can I sell copies of this?

Yes! This project was shared under the Creative Commons - Attribution license.

This license allows selling copies, but you must provide proper attribution, as detailed in the license itself.

Please note that any other projects linked here (remixes or related projects) may have a different license. Please respect those licenses.

This license applies only to the model files (STL, 3MF, STEP, F3D) included in this project. It does not apply to photos, videos, my logo, or other supplemental graphics attached to or displayed with this project.
 

Recommended Attribution Text

"Nodes Construction Toy" (https://3dprinty.xyz/project/81) is designed by 3D Printy (https://3dprinty.xyz) and shared under a Creative Commons Attribution (CC BY 4.0) license (https://creativecommons.org/licenses/by/4.0/).