Kitchen roll holder for 50x50mm kitchen rolls, like aluminum foil, baking paper, etc. A version for 2 or 4 rolls available. The two-roll version can be printed with Prusa Mini.
The outer dimensions are 245x60x205mm (4 roll version), or 127x60x175mm (2 roll version). Rolls can be (and usually are) longer than the length of the unit. The unit can be easily attached with e.g. double sided tape or drilling holes and attaching it with a couple of screws.
Layer height: 0,2mm or even higher
Infill: 20%
Brim or custom supports highly recommended, as the print is fairly high and can quite easily detach from the print bed as it gets higher during the print. Alternatively, the acceleration and travel speeds could be reduced to prevent the part from detaching from the bed.
The attached g-code file is to illustrate the material and other requirements, not optimized for best printing results.
The author hasn't provided the model origin yet.