Parametrized Photo Frame

A parametrized 3D photo Frame in OpenSCAD. Easily adjust the frame size,
thickness, depth, and photo inset.

Parameters

• nominal_dimensions sets the photo size.
• front_depth sets the thickness of the frame in front of the photo. A high
   value here will create a shadow box effect.
• back_depth makes the photo frame thick or thin.
   

Printing Instructions

Your default printer settings are probably fine. Here's what I used:

• PLA
• 0.2mm layer height
• 10% infill

The Frame

• Print face down without supports.
• Can be printed face up with suppports on the inner edge (e.g. if you want to
   put text on the front). Avoid using supports in the two slots for the back and
   in the hanger hole.

The Back

• Just print it. No supports needed, and infill doesn't matter since it's so
   thin.
   

Collaborate on GitHub!