Emek / Etha Sight Rail

Sight rail for Emek paintball marker. Intended for use with an occluded sight (Armson), directly behind the feed neck.

Print Settings

Printer Brand:

MK3

Printer:

Prusa i3

Rafts:

No

Supports:

No

Resolution:

.15mm

Infill:

20%

Filament: Prusament PLA Grey

Notes:

First posted project.

Post-Printing =============

Mounting

Uses (2) #6-32 screws, drilled and tapped into the body. Check screws for no penetration into the interior of the body after installation, grind or cut the screws until flush on the interior. Do not over tighten screws.

How I Designed This ===================

Body application

Shape underside was cut from the Planet Eclipse publicly provided Emek body model. 50mm long.

Category: Sport & Outdoors