HSW Webcam mounting bracket

This is a Remix of two models. I used the insert provided by RostaP with their Honeycomb storage wall solution and the remaining pieces by ps915's Universal Webcam mount.

I originally printer the webcam mount, but I required a solution that wasn't statically mounted to the wall. I wanted to adjust my webcam height depending on the height of my final prints, because taller prints were out of frame, but low prints were out of few as they are covered by the hotend. I found this to be the best solution.

The files are parametric and you can customize it for your own magnets. I used 6x3mm magnets and used 6 of them.

Custom camera focus ring

Universal Webcam mount

Honeycomb Storage wall