Geeetech Prusa i3 Pro B Z-Axis Wobble Fix

I know there are loads of mods available to fix the Geeetech Prusa i3 Pro B wobbly Z-Axis but I prefer to design and print my own so I thought I would share my design. I have designed a replacement i3-08 top plate with an oversized hole for the M8 threaded rod to allow it to move. If the rod is bent and the rod is not free to move at the top all the movement will happen in the middle which causes the wobble on your printed pieces. I have also designed a piece to isolate the M8 brass nut from the X-Axis carriage so the M8 rod is not directly connected to the carriage and any deviation is not transferred to the print. Please not the picture of the replacement i3-08 is of an older design and it has since been modified.

Print Settings

Printer Brand:

Prusa

Printer:

Prusa Clone

Rafts:

No

Supports:

No

Resolution:

0.2mm

Infill:

50%