Bambu Lab X1C & P1P Single Layer Test 0.2mm

I've mapped this test model to 230 x 230, its a little bit of a misguided statement that the X1C and P1P have 256 x 256 build plate dimensions since you do need to avoid the extrusion at the front left of the machines to avoid accidentally cutting the filament. I figured its plenty enough to get the job done. Just make sure you move it off centre to, again, avoid that extrusion. also, you can freely rescale the model to take up more space if desired, just make sure you only adjust the X and Y axis and not the Z.

I have added a larger 240 x 240 with a 35mm cut out for the extrusion if you want to cover a little more area! 

Print @ 0.2mm layer height and you'll be set :)

I used Royal blue Prusament for the photo and a PEO build plate for the pattern. Sadly the surface has already developed some small bubbles on the surface :/ uncertain if it is due to my impatience, or perhaps just the way its manufactured. either way, I still find it worthwhile having :). You can find one here: https://www.aliexpress.com/item/1005005193378909.html?spm=a2g0o.order_list.order_list_main.69.5fd11802j35kDx

If you accidentally (or impatiently ;) ) bend the test sheet, you can heat up the print bed to around 70 degrees and place the sheet on the bed. In no time you'll be able to make the test sheet flat again. It happens, I get it. Just don't burn yourself 

I made the same test for the MK4/Mk3s:https://www.printables.com/model/473119-prusa-mk4-single-layer-test-02mm