TS100 Soldering Iron PSU Case

TS100 Soldering Iron PSU Case.

The two case parts are printed at 0.2 layer height with 4 walls 4 top and bottom layers and 20% infill. Support required for openings. Change as required for your needs.

Case has optional mount position for a 4010 24v fan if you find the PSU heatnig up otherwise the case is well ventilated.

BOM

6x M3x4x5mm heat set brass inserts

2x M3x6mm BHCS (PSU)

4x M3x8mm BHCS or SHCS

1x GX16-2pin

1x IEC 240v Fused Male Power Plug with Switch

1x KCD1 Rocker Switch 250VAC 10A With Led Light

1x Mean Well 24v 3.2A 75w PSU. Model Number LRS-75-24

4x Rubber feet

Some wiring and connectors.

TS100 comes with power cable that you solder onto the GX16 2 pin connector.

Works for me.

Please consider a donation to help support my designs.
PayPal.Me/RedWhere2020

Category: Hobby