Intex 38mm 90deg Outlet Elbow

Our pump has a higher GPH output than what came with the pool and I wanted to make the path a uniform cross-section throughout. Only major change was making the elbow outlet hole round and using a radiused, 90deg bend.

Update: Had to reprint it this seasonand ended up scaling by 103% in Z axis. It snapped into the intex nozzle this time around. It was apparently just friction fit at 100%.

Only major change was making the elbow outlet hole round and using a radiused, 90deg bend.

Recommend scaling Z axis to 103% so it snaps into the port better.