BigBox PanelDue 5i Holder

Two-piece holder to mount the PanelDue 5i to the E3D BigBox.

To mount the bottom piece to the frame: You'll need 8x M3 cap screws, M3x16 should work. These M3 screws mount into the BigBox nut traps that are held by the acrylic frame.

To mount the PanelDue to the top piece: I used 5x old motherboard screws, use what you have.

To mount the top to the bottom: 4x of any M3 screw (must be 30mm long or more) & M3 hex nut.