IDEX Extruder Z-Axis Calibration and Bed Level Validation Pattern (Snapmaker J1)

Printables does not like .par and .gcode files, they can be found here: https://www.thingiverse.com/thing:6008156

Solid Edge source file included if you need to modify this design

Simple 2-part pattern allowing you to print a single test pattern using 2 extruders to verify your bed level and Z-Axis Offset.

The .3MF is for a 300x200 build plate.

The .gcode file can be used directly in a Snapmaker J1 with PLA/PLA+ loaded in both extruders.

Print Settings

Printer:

Snapmaker J1

Rafts: 

No

Supports:

No

Resolution: 

0.4mm Line Width / 0.25mm Initial Layer Height

Category: 3D Printing Tests