4" Vinyl Siding Corner Bracket for Ubiquiti G4/G5 Cameras (Threaded Insert)

4" Siding Mount for 2 Ubiquiti G4 Bullet or G5 Pro Cameras and others that use the same mount.

Big thanks to user PHOENlX for providing mount on Thingiverse.

https://www.thingiverse.com/thing:4930947 

Print Settings

Printer Brand:

Prusa

Printer: 

Prusa MINI

Rafts:

No

Supports: 

Yes

Resolution:

0.15

Infill: 

15%

Filament: Hatchbox PETG Bronze

Notes:

Printer: Prusa MINI
Slicer: PrusaSlicer-2.6.0-alpha6

Supports: Organic

Made infill around the inserts and mating point 100% infill for extra strength

Post-Printing

Threaded inserts used: x7 M4 x 6 x 7mm

Amazon link: https://www.amazon.com/dp/B07VFZWWXY

--

Hex socket bolts: x3 M4 x 12

Amazon link: https://www.amazon.com/dp/B07PHYJ8BB?th=1 (Closest to what I could find to what I bought awhile back)

Used a normal cheap soldering iron with its stock tip, pushed it straight in and held flush for about 1~2 minutes to (hopefully) allow the PETG to flow around the insert.

How I Designed This

Used Prusaslicer to modify the part from user PHOENlX's corner pipe holder to accompany the two cameras for this build. Unfortunately due to using Prusaslicer to modify the model, the part is unable to be saved as an STL as negative volumes are not able to be exported.

The model is cut in half in order to make it easier to mount high up rather than pushing it from the ground up as it is a tight fit. With the inserts being 6mm in diameter, I chose to use 5.90mm for the insert holes for there to be internal overflow between the straight ridges.