Tower of Hanoi

"Tower of Hanoi" is a well-known puzzle game, where you put eight disks from one rod to another, but are only allowed to grab only one disk at a time and never put a bigger disk upon a smaller. To do so, there are three rods altogether, one to start from, one for the final result and a third one as a temporary storage for the disks.

+++ Update: I made a revised version with thicker rods and bigger holes in the disks. +++

The diameter of the smallest disk is 20 mm, the diameter of the biggest is 55 mm.

To print the disks with two different colors, there are two sets of disks, one with even and one with uneven number of disks. Of course there is also a set with all disks at once.

I designed the 3D models of all parts in Shapr3D, spliced them with PrusaSlicer and let them print with my Prusa i3 Mk3. Supports are not necessary.