Kelvin 4-Wire Adapter

Hi folks

I have a Kelvin 4-Wire adapter that works on my Fluke 8845A and Keysight 34465A bench meters. I have tested with 0.1% resistors and measurement are spot on accurate. The parts I used were the Mueller BU-P72918 threaded banana plugs. You could also use the Pomona 72918 as well. The threaded studs are M3 and 12mm in length. The clips are Mueller BU-75K Kelvin clips, but you could use any Kelvin type clip you like. The Mueller clips are pretty inexpensive compared to most and they work very well for me. You will need some very small ring terminals for both the clips and plugs. I used 22AWG silicone wire, soft and very flexible, but you could use what ever wire you like.

Happy printing ;p