V6 Nozzle Box

Found the great little Nozzle Box by @max102 but wanted it for 0.25, 0.4 and 0.6 mm nozzles (and wanted a decimal place rather than a comma :D)

I also wanted to be able to use a simple colour swap to print the text in a different colour without affecting the outer box/case so I remixed into component parts.

I also changed the text etc on the lid and the text etc on the insert.

To print the text on the lid simply open the “Lettering.3mf”, slice and print without a skirt then once done remove the purge line but leave the text on the build plate and then open/slice/print the “Case-With lettering.3mf” and it should work just fine.

If you prefer the case without lettering that is also included “Case-No Lettering”

For the insert part just open/slice/print “Insert.3mf” with a colour change at 9.2mm layer height if you want the text in a different colour.

To assemble I then glued the inset inside the case with a small amount of superglue.