Copepod Hotel

I recommend against printing the cover. I need to improve it and currently the sides of the cover and sometimes the legs fail to be detachable from the supports. I need to do more research into this before I can recommend printing the cover.  I repeat, DO NOT PRINT THE COVER.

I recommend petg and I recommend 0.4mm nozzle.  Ideal orientation is each part touching the board with the cover, legs up. Increase cover scale 1% for ideal fit as well.

The print takes a while, and I have no explanation for that. It usually takes a long time to slice as well because the model is mostly walls. 

I am not sure infill % makes any difference but I have also not checked. I only needed one.