Stand for top-view camera experiments
Simple stand for camera experiments (calibration, image processing, AI, ML, etc.). Primarily used with Nicla Vision.
3
19
0
156
updated
May 3, 2023
Description
PDFStand made for experiments with ML image processing. As a board, Arduino Nicla Vision was used.
As pipes, standard, aluminum extruded 12mm pipes were used.
FreeCAD files attached if you want to modify them.
List of materials:
| Item | Length | Qty | Notes |
|---|---|---|---|
| 12 mm pipe | 350 mm | 4 | |
| 12 mm pipe | 100 mm | 4 | |
| 12 mm pipe | 250 mm | 4 | |
| 6x6 mm channel section | 120 mm | 2 | |
| M3x12mm | 8 | ||
| M3 nut | 8 |
Model origin
The author marked this model as their own original creation.