A compact bracket that allows a Pi camera module to be mounted to the X-axis of a Prusa BEAR.
The bracket consists of two rotational joints that can be used to adjust the camera angle to your preference.
I used the following model as reference for the camera module: Grabcad link
Files
- base-MINI: To be used with the MINI BEAR 10mm Z rod (right idler)
- base-MK3: To be used with the MK3 BEAR 8mm Z rod (left idler)
Print settings
- Material: PETG
- Layer height: 0.2mm
- Infill: 30%, Grid
- Supports: :
picam-cover:
build plate only, snug, rest
: none - Orientation: see pictures
Hardware
- 1x M3x20 hex-head bolt
- 1x M3x14 hex-head bolt
- 1x M3x8 hex-head bolt
Assembly instructions
- First focus on the arm assembly:
- (If you prefer, you can prepare the parts with the locknuts beforehand).

- Remove the bottom bolt from the right x-axis-idler
- If preferred, you can mirror the
base
part, and attach the bracket to the left idler.
- Use the M3x20 bolt to attach the bracket to the idler.
- The cable mechanism for connecting the Pi camera is exposed and allows easy connection without the need to disassembly anything.
Done!
Tags
The author marked this model as their own original creation.