X1C 4"/100mm Straight Exhaust Vent (AMS-hub compatible)

I recently upgraded to the AMS-hub for my Bambu Lab X1C and didn't see any exhaust vent mods that fit it so I decided to remix one and make a few changes.

This exhaust vent is designed to fit a 4"/100mm ID ducting hose.  There is a slight taper that should help with putting the hose on.

3 holes surrounding the exhaust need to be tapped.  They tap easily for m3 screws and the model is designed to use it.  There is a fourth hole on the left side that lays on top of an existing screw but you don't need to use it and I left it there as an indicator for alignment.

BOM:

3x M3 x 6 hex socket head screws.