Nose Flute with Bottle Opener

This is a simple nose flute with an integrated bottle opener.

It is printed in 2 parts which should hold on to each other by just pushing them together, you may need to glue them together based on your printer settings.

The supports of the bottom part are easily removeable, the bottom part may even remove itself while removing your print from your build plate.

The support at the hole can easily be pushed out from the top.

To play the nose flute you need to put your nose at the top hole and close your lips around the bottle opener hole.

Then simply “blow” air through your nose and alter our mouth shape to change the tone.

This may need some tries to get a tone.

I honestly don't really know how long the bottle opener is going to last, I may do an updated version with a stronger bottle opener.

I'm also adding a version with a hole for a key ring soon.

Have fun and let me know if you have any ideas for improvements!

I may need some time to figure stuff out since I'm new to 3D printing and don't have an own printer yet.