65 mm Frame 615 Brushed Motors

This drone really prints and really flys with real store-bought parts!!!
Needs:
4x 615 motors. 2x counter-clockwise and 2x clockwise.
1x AIO 1s Flight Controller. (I would like to put a BetaFPV F4 in this drone but I only have a BeeCore F3.)
1x 250mAh stick Lipo battery
Recommended: Print a Canopy! Worth it!!!

After working with the UR65 Brushless or HalfChrome Brushed models which neither printed well. I created a new brushed model that did print well. (still working on a brushless model.) This thing prints super Awesome! Well... in PETG. I am currently working on printing this in Nylon to little success. But that is because I have never worked in Nylon.

Print instructions

How this file works:
I couldn't print this file unless I split it into 7 parts. One frame, 4 motor holders and 2 battery tabs. Then use epoxy glue to glue it together. The motor holders slip into the frame motor circles and the battery tabs fit over the tray. There is no real marking for where the battery tabs go because you can place them anywhere on the battery tray. I needed room for a USB to stick out. Some people use velcro and don't need the tabs at all. You have options!
The photos show how I placed everything.

Don't add Rafts or Supports, it just messes the file up.

With Nylon I had to print the frame separate from the motor holders and battery tabs.