Bambu Lab X1C/P1P Ironing Flow Test

Works with either Bambu Studio, or Orca Slicer.

Uses default 0.20 Standard @BBL X1C settings. 

To use with P1P Series printers, you will need to adjust the profile to match your printers settings. The Ironing modifiers should remain in place. 

The project is broken down into 4 different speed settings(15%, 20%, 25, 30%), with different ironing flow % modifiers.

Typically the 30% speed should produce good results, but I have provided other speed settings in case it doesn't. If 30% speed looks good, you do not need to print the other speed tests.