GepRC Cinelog25 – Cleanest, light-weight printable parts for the famous sub-250g CineWhoop

Update 19.05.2024.: I upgraded the propeller guards further. Rigid on the inside and flexible on the outside. And 3 grams lighter!

https://www.printables.com/model/884159-unbreakable-propeller-guard-for-cinewhoops-upgrade

Update 17.06.2023.: Use these as the prop guards:

https://www.printables.com/model/507440-unbreakable-propeller-guard-for-cinewhoops-the-eng

Update 07.05.2023.: Added a mount for a rear-mounted Naked GoPro. It is integrated into the VTX and RX antenna mount so it has very little extra weight.

--------

This collection of printable parts for the Cinelog25 can be considered 95% ready, as I am at the end of building and testing my final Cinelog25.

I never liked the straight FC orientation of the Cinelog25 frame and the asimmetric cabling of the motors. So with a simple and weight-saving design I made the FC diamond-oriented. I also created better VTX + RX antenna mounts and also FPV camera mounts. I also made a “pouch” for the Crossfire Nano receiver so no double sided adhesives or other disgusting things are needed for your very clean build. Oh, and don't forget the well-secured capacitor near the FC.

I use naked Caddx Vista and with my design only 4pcs M1.6x20 (I am not sure about the length) screws are needed for the FC and Vista stack. The whole electronics stack can be dismounted easily for maintenance purposes. I also included some spacers for the panels, see photos for orientation and spacing.

If you have any questions of feedback, please share it in the comments!

Printing and assembly

The parts should be printed from TPU. I used 95A hardness eSUN TPU. I used 3 perimeters and 50% infill. For assembly guidance see my photos.

Source files

I include the source files for education and personal purposes but please don't do evil things with it and don't steal this design. If you want to use it for commercial purposes, please contact me and we will find a solution.

Feedback is important!

I spend countless hours perfecting and testing my designs and I would love to hear your feedback too. If you like my designs I appreaciate a like or a comment. Please post a photo if you print this.

Commercial inquiries and applications

Please contact me if you like my designs and would like to cooperate or develop a similar solution.

Donations

I am open to any kind of donation if you want to support me :)

https://paypal.me/andrasbognar